친환경 형광안료

HS COLOR FL-Series aqueous dispersion of fluorescent pigments.

FL-Pigments are aqueous dispersion of fluorescent pigments which donot contain formaldehyde, they have fine particle size with narrowdistribution, bright ,high tinting strength, can be widely used in aqueousseries field.

Applications:

1. Water based flexo inks
2. Water based gravure inks
3. Water based textiles printing or dyeing
4. Highlighter inks
5. Paper coatings

Available Colors:

1. FL-15 Yellow
2. FL-16 Golden Yellow
3. FL-14 Orange
4. FL-11 Red orange
5. FL-13 Red
6. FL-07 Cerise
7. FL-17 Pink
8. FL-27 ROSE
9. FL-37 RUBINE
10. FL-47 Violet
11. FL-18 Blue
12. FL-12 Green

Physical & Chemical Properties:

1. Specific Gravity 1.0-1.1
2. Average Particle Diameter 0.2-0.25micron
3. Solid Percentage 40%-42%
4. PH value 7.0-8.5

FL Series have good indoor lightfastness ，but outdoor lightfastness is limited ,so test is needed before use.

FL Series’ properties are stable under freeze and thaw, but the effects show the best if the processing temperature below 60 degrees. When use the FL Series, other materials like additive, joint as well as assist solvent have an influence on the properties of products, so essential test is needed while choosing.

FL Series have good compatibility among aqueous system, the disperse effect will show the best only if mixed a little, but it is not compatible among non-aqueous system.

Disclaimer：

Our technical advice, information and statements—given verbally, inwriting or in the form of test results—is offered for your guidance without warranty.NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS MADE. Our guarantee is limitedto the consistent quality of our products.

leader in fluorescent technologies introduces its latest

product innovation.

ECO Pigments are the first formaldehyde-free pigments to attain the color brilliance and

stability offered by traditional formaldehyde containing products with the added benefit

of being produced using recycled materials. Uncompromising performance and earthfriendly

materials that:

Reduce the volume of plastic waste disposed in landfills

Conserve energy and natural resources

Eliminates many “Chemicals of Concern “

HS COLOR FL Pigments are thermoplastic fluorescent pigments that are recommended fora wide range of applications where resistance to strong solvents is not required. Theyperform well in a system based on aliphatic and aromatic hydrocarbons. They are alsosuitable for aqueous systems. ECO Pigments can be used in applications such as papercoatings, textile printing, A-type gravure inks, craft and hobby paints, and vinyl plastisols.ECO Pigments offer uncompromising performance in earth-friendly products that arefree of the following chemicals.

Formaldehyde

Heavy Metals

Azo Compounds

Perfluorooctanoic Acid

Aromatic Amines

Regulated Phthalates

Bisphenol A (BPA)

Polyaromatic Hydrocarbons

SVHC Chemicals

California Prop. 65 Chemicals. HS COLOR FL Pigments also have the following characteristics.

Oeko-Tex 100 compliant

Non-Toxic

CONEG compliant

REACH compliant

EN-71 compliant

RoHS compliant

GOTS 3.0 compliant Available Colors: Aurora Pink* ECO-11 Rocket Red* ECO-13 Fire Orange* ECO-14 Blaze Orange* ECO-15 Saturn Yellow* ECO-17 Signal Green* ECO-18 Horizon Blue* ECO-19 Ultra Violet* ECO-20 Corona Magenta* ECO-21 * Trademark of DayGlo Color Corp., Cleveland, OH

Lightfastness:

Film Tickness Pigment Loading

3-5 mil (75-125 microns) 20-35%

10 mil (250 microns) 10-20%

20 mil (500 microns) 7-15%

40 mil (1,000+ microns) 2-8%

Typical Physical Properties:

Tg 120C (248F)

Melting Range 145-150C (284-302F)

Density 1.2 g/ml

Apparent Density 0.37 g/ml (23 lbs./cu. ft.)

Oil Absorption 80 gram oil/100 gram pigment

Mean Particle Size 4.5 m

26%

RECYCLED CONTENT

Technical Bulletin

DayGlo Color Corp. 4515 St. Clair Avenue Cleveland, OH 44103 (216) 391-7070 www.dayglo.com

Typical Formulations:

Acrylic Aerosol Concentrate (parts by weight)

45.5 Paraloid F-101 or Elvacite 20442

35.0 ECO Pigment

19.5 Lactol Spirits

100.0

Prepare with high speed mixing. Thin with Lactol Spirits. To can, use 65% of the thinned

aerosol concentrate and 35% of a propellant, such as A-70 (propane/isobutene blend).

Paraloid F-10 is 40% solids in Mineral Thinner/Amsco F and Elvacite 2044 should be

dissolved in Minerals Spirits at 40% resin solids.

Alkyd Brushing Paint (parts by weight) (high speed mix)

40.00 Beckosol 11-0813 (50% in VM&P Naphtha)

0.40 Cyasorb UV-244

50.50 ECO Pigment

0.08 12% Cobalt Hex Chem5

0.20 Skino #25

0.20 Cab-O-Sil6

8.62 Mineral Spirits

100.0

Water Dispersion (parts by weight)

Part A

56.00 Water

1.23 Methocel K4MS7

0.20 Dowcil 757

40.00 Water

2.56 Tamol 731 (25%)1

0.01 Triethanolamine

100.00

Part B

49.4 Part A

50.0 ECO Pigment

0.6 Hodag PX-1108

100.0

Add the materials in the order listed and completely disperse before making the next

addition. Use a high-speed dissolver to achieve proper dispersion.

A-Type Gravure Ink (parts by weight) (high speed mix)

30.0 Paraloid NAD-101

50.0 ECO Pigment

20.0 Heptane

100.0

Add the materials in the order listed and completely disperse before making the next

addition. Use a high-speed dissolver to achieve proper dispersion.

PVC & Phthalate Free Plastisol Ink (parts by weight)

47.9 168 Plasticizer9

0.7 Bykoplast-100010

40.5 Dianal LP-320211

0.9 Ti-Pure R-10112

10.0 ECO Pigment

100.0

Mix the 168 Plasticizer and Bykoplast-1000. Disperse Dianal LP-3202 into the mixture

using a high speed disperser. Disperse the Ti-Pure R-101 using a high speed disperser or a

3-roll mill. Disperse the ECO Pigment using a high speed disperser.

Prints cured 150oC for 3 minutes.

1Rohm and Haas Co 7Dow Chemical

2Lucite International 8Lambent Technologies

3Reichhold Chemical Inc. 9Eastman Chemical

4Cytec 10Byk-Chemie

5OM Group 11Mitsubishi Rayon Co.

6Cabot Corp. 12DuPont